Tango Calling Features

Voicemail
Feature Activation Digit
Abbreviated Dial
Anonymous Call Rejection
Call Block (Selective Call Rejection)
Call Forward (All Calls)
Call Forward (Busy)
Call Forward (No Answer)
Call Forward (Out of Service)
Call Return
Call Trace
Call Waiting
Caller ID Block
Conference
Dial Tone and Ringer Patterns
Do Not Disturb
Hold
Permanent Caller ID Block Release
Priority Call
Privacy Guard
Redial
Selective Call Forward

Voicemail

The VoIP voice mail system stores messages in your personal voice mailbox from callers who are unable to speak with you, and provides an indication that voice mail has arrived.
Learn more about this feature

Feature Activation Digit

Some features require you to dial an activating digit followed by a numeric code (example: 588). The default value for this activating digit is 5 and it is used throughout this document. However, your system administrator may choose to use another digit for this function. In that case, substitute your activating digit for the default. Operation of all features will be exactly the same.
Learn more about this feature

Abbreviated Dial

This feature lets a you create, modify, delete, verify and use a personal list of up to 100 Abbreviated Dial codes. Abbreviated Dial codes must be entered as two digits when programming and dialing (Example: enter 04 instead of 4).
Learn more about this feature

Anonymous Call Rejection

When enabled, this feature rejects calls from callers who block the display of their caller ID information.
Learn more about this feature

Call Block (Selective Call Rejection)

Call Block (also known as Selective Call Rejection) allows you to program your phone to reject calls from a list of telephone numbers. All calls from phones on the list receive a message which says you are not accepting calls.
Learn more about this feature

Call Forward (All Calls)

Call Forward (All Calls) allows you to forward all calls for your phone to the number you enter. Calls will not ring at your phone and will be sent to the number you entered as the forward destination. If your telephone has a display, it will show that your telephone is forwarded. You can forward calls to an IP or non-IP phone.
Learn more about this feature

Call Forward (Busy)

Call Forward (Busy) allows you to forward calls arriving at your phone while it is busy to be forwarded to the number you enter. Calls will not ring at your phone and will be sent to the number entered as the forward destination.
Learn more about this feature

Call Forward (No Answer)

Call Forward (No Answer) allows you to forward calls that are unanswered at your phone to the number you enter. Calls will not ring at your phone and will be sent to the number entered as the forward destination.
Learn more about this feature

Call Forward (Out of Service)

Call Forward (Out of Service) allows you to forward for your phone when it is out of service to the number you enter. Calls will not ring at your phone and will be sent to the number you entered as the forward destination. You can forward calls to an IP or non-IP phone.
Learn more about this feature

Call Return

Using this feature dials the telephone number of the last incoming call. However, if the caller is shown as “Unknown”, then Call Return will not work.
Learn more about this feature

Call Trace

Call Trace allows you to record the telephone number of an offending call, but must be performed immediately after the offending call is ended.
Learn more about this feature

Call Waiting

If your phone is configured with Call Waiting, you can answer an incoming call without disconnecting from the current call.

If a call comes in while you are on the phone, you will hear a single beep repeated approximately every ten seconds.
Learn more about this feature

Caller ID Block

This feature blocks the display of your phone number to the called party for this call only. Be aware that if the person you are calling does not accept anonymous calls, your call will be rejected since no Caller ID information is provided.
Learn more about this feature

Conference

If supported by your system, you can conference several internal and/or external parties together. Check with your system administrator for the availability of this feature on your system.
Learn more about this feature

Dial Tone and Ringer Patterns

The VoIP telephone system generates different ringer and dial tones, depending on call conditions.
Learn more about this feature

Do Not Disturb

Do Not Disturb instantly routes all your incoming calls to another destination (your voice mailbox, the main operator, your secretary, a co-worker, etc.), but still lets you make calls and use other telephone features. With Do Not Disturb enabled, the phone will not ring when a call comes in.
Learn more about this feature

Hold

This feature lets you place a call on hold. While a call is holding, the holding party occupies the associated line.
Learn more about this feature

Permanent Caller ID Block Release

If you chose to have your caller ID information blocked on all calls, this feature allows your caller ID information to be sent for this call only.
Learn more about this feature

Priority Call

The Priority Call feature allows you to define numbers that will ring at your
telephone with a special ring that tells you this is an important call. To use this feature, you manage a list of telephone numbers (internal or external) that cause the priority ring to sound when a call with that caller ID appears at your telephone.
Learn more about this feature

Privacy Guard

Privacy Guard is a call screening service that works with Caller ID to identify all incoming calls that have no Caller ID, such as calls that are Anonymous, Unavailable, Out-of-Area, or Private. It forces callers to identify themselves by entering an access code or recording their name in order to complete the call. You will know who is calling and have four options for handling the call.
Learn more about this feature

Redial

This feature lets you redial the last number (internal or external) that you dialed.
Learn more about this feature

Selective Call Forward

Selective Call Forward allows you to program your phone to send calls from a list of telephone numbers to another telephone number. All calls from phones on the list go to the same destination, which can be changed at any time.
Learn more about this feature